产品分类
联系我们
回收CISCO NM PA系列
首页 » 产品展示 » 网络模块接口卡回收 » 回收CISCO NM PA系列
PA-T3产品简介
The PA-T3(=) serial port adapter is a single-width, one-port module that integrates data service unit (DSU) functionality into the Cisco router. The PA-T(=) provides one high-speed serial PA-T3 interface on Cisco 7100 series routers, Cisco 7200 series routers, Cisco uBR7200 series routers, Cisco 7301 routers, Cisco 7304 PCI Port Adapter Carrier Card in Cisco 7304 routers, Cisco 7401ASR routers, on the Versatile Interface Processor (VIP) in all Cisco 7000 series and Cisco 7500 series routers, on the Catalyst 6000 family FlexWAN module in the Catalyst 6000 family switches, and on the Catalyst RSM/VIP2 in the Catalyst 5000 family switches. (See Figure 1-1.)
The PA-2T3(=) serial port adapter is a single-wide, two-port module that integrates DSU functionality into the Cisco router. The PA-2T3(=) provides two high-speed serial PA-T3 interfaces on Cisco 7100 series routers, Cisco 7200 series routers, Cisco uBR7200 series routers, Cisco 7301 routers, Cisco 7304 PCI Port Adapter Carrier Card in Cisco 7304 routers, Cisco 7401ASR routers, on the second-generation VIP in all Cisco 7000 series and Cisco 7500 series routers, on the Catalyst 6000 family FlexWAN module in the Catalyst 6000 family switches, and on the Catalyst RSM/VIP2 in the Catalyst 5000 family switches. (See Figure 1-2.)
Serial network interfaces reside on modular port adapters, which provide a direct connection between the high-speed bus in the router and the external networks. The PA-T3 provides a full-duplex synchronous serial PA-T3 interface for transmitting and receiving data at rates of 44-45 megabits per second (Mbps) depending on the framing used.
The PA-T3 supports both 16- and 32-bit cyclic redundancy checks (CRCs). The default is 16-bit CRCs. To enable 32-bit CRCs, use a configuration command
Figure 1-2