产品分类
联系我们
回收CISCO HWIC VWIC WIC VIC系列
首页 » 产品展示 » 网络模块接口卡回收 » 回收CISCO HWIC VWIC WIC VIC系列
VIC-2MFT-T1-DIR思科原装线卡模块产品简介
The VIC-2MFT-T1-DIR思科原装线卡模块 and VWIC-2MFT-E1-DIR Voice/WAN Interface Cards support data applications on the Cisco MWR 1941-DC Mobile Wireless Edge Router for T1/E1 networks. These cards are dual-port, T1/Fractional T1 or E1/Fractional E1, Drop and Insert Multiplexers with integrated T1 CSU/DSUs or E1 DSUs. The T1 version supports framed and unframed traffic, and the E1 version supports framed traffic and unframed traffic that conforms to the ITU-T G.703 standard for VIC-2MFT-T1-DIR思科原装线卡模块full 2.048 Mbps bandwidth.
The Drop and Insert multiplexer diverts (drops) streams of an aggregate Time Division Multiplexed (TDM) traffic stream, and introduces (inserts) different streams for transmission in the time slots that were VIC-2MFT-T1-DIR思科原装线卡模块previously occupied by the dropped streams. Each VWIC supports a limited channelized capability where the T1 or E1 can be flexibly split into two fractional channel groups, one on each port or two on one port. The switching VIC-2MFT-T1-DIR思科原装线卡模块operation can be maintained through router restarts and reloads of Cisco IOS software.
Each card also VIC-2MFT-T1-DIR思科原装线卡模块features protection switch solid state relays on the line interfaces, which together with redundancy logic and relay control added in a Cisco IOS feature set on the MWR 1941-DC router, can be used to provide T1/E1 Protection Switching between redundant routers inVIC-2MFT-T1-DIR思科原装线卡模块 applicable implementations.
Note For information on the Cisco MWR 1941-DC router implementations and VIC-2MFT-T1-DIR思科原装线卡模块Cisco IOS software available for those implementations, see the Cisco MWR 1941-DC Mobile Wireless Edge Router Software Configuration Guide.
The Cisco MWR 1941-DC router provides three WAN interface slots, which allows support for 6 T1/E1s.