产品分类
联系我们
FIBERXON光模块回收
首页 » 产品展示 » 各类名牌光纤模块回收 » FIBERXON光模块回收
原装行货FIBERXON FTM-9712S-SL20光纤模块
发布时间:2013-12-18 9:21:55 点击量:
FIBERXON SP-GB-LX-CNFJ S10-1310-1.25G产品简介
Features FIBERXON SP-GB-LX-CNFJ S10-1310-1.25GSingle fiber bi-directional data links with symmetric 1.25Gbps upstream and 1.25Gbps down
stream Integrated with micro-optics WDM filter for dual wavelength Tx/Rx operation at 1490/1310nm
1490nm continuous-mode transmitter with DFB laser
1310nm burst-mode receiver with APD-TIA
Optical isolator built in for extreme Return Loss tolerance
Resetless burst-mode receiver design FIBERXON SP-GB-LX-CNFJ S10-1310-1.25G
Support more than 24dB dynamic range
0 to 70°C operating temperature (S-SL20)
-40 to 75°C operating temperature (S-SL20E)
Spring-latch SFP (Small Form-factor Pluggable) package with SC receptacle optical interface.
Detailed product information in EEPROM FIBERXON SP-GB-LX-CNFJ S10-1310-1.25G
Digital diagnostic interface compliant with SFF-8472 Rev 9.4
Single 3.3V power supply FIBERXON SP-GB-LX-CNFJ S10-1310-1.25G
Maximum 1W total power dissipation
LVPECL compatible data input/output interface
LVTTL transmitter disable control FIBERXON SP-GB-LX-CNFJ S10-1310-1.25G
LVTTL transmitter laser failure alarm
LVTTL receiver Loss Of Signal(LOS) indication
Low EMI and excellent ESD protection
ClassⅠlaser safety standard IEC-60825 compliant
RoHS compliance (S-SL20G and S-SL20EG
FIBERXON SP-GB-LX-CNFJ S10-1310-1.25G
Applications FIBERXON SP-GB-LX-CNFJ S10-1310-1.25G
Gigabit Ethernet Passive Optical Networks
(GE-PON) – OLT side
Compliant with IEEE Std 802.3ah™ -2004
Compliant with FDA 21 CFR 1040.10 and 1040.11,
ClassⅠ FIBERXON SP-GB-LX-CNFJ S10-1310-1.25G
Compliant with SFF-8074i Rev 1.0
Compliant with SFF-8472 Rev 9.4
Description FIBERXON SP-GB-LX-CNFJ S10-1310-1.25G
FTM-9712S-SL20(E)(G) is Optical Line Terminal (OLT) compliant with IEEE 802.3ah™-2004 1000BASE-PX20 application.The transceiver is the high performance module for 1.25Gbps data link in single fiber by using 1490nm continuous-mode transmitter and 1310nm burst-mode receiver. The transmitter section uses a multiple quantum well 1490nm DFB laser and is CassⅠlaser compliant product according to international safety standard IEC-60825. The receiver section uses an integrated 1310nm APD (Avalanche Photo Diode) and preamplifier mounted in an optical header and limiting post-amplifier IC. Unlike the conventional burst-mode receiver, the receiver does not require reset pulse to receive optical data packets with different optical
power. The optical output can be disabled by LVTTL logic high-level input of TX Disable. TX Fault is provided to indicate that degradation of the laser. Loss of Signal (LOS) output is provided to indicate the loss of an input optical signal of receiver.
Enhanced Digital Diagnostic Monitoring Interface (DDMI) compliant with SFF-8472 Rev 9.4 has been incorporated into the transceivers. It allows real time access to the transcevier operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage by reading a built-in memory with I2C
interface. For further information, please refer to SFF-8472 Rev 9.4.