dwdm-gbic-42.94光模块产品简介
1-GB GBIC Transceivers
Figure B-2 shows a 1000BASE-T (copper) GBIC transceiver. Figure B-3 shows a 1000BASE-X (optical) GBIC transceiver. Table B- lists the cabling specifications for the GBIC transceivers.
dwdm-gbic-42.94光模块
Figure B-2 1000BASE-T GBIC Transceiver (WS-G5483)
Figure B-3 1000BASE-X GBIC Transceiver Modules (WS-G5484, WS-G5486, and WS-G5487)
Table B-5 GBIC Transceiver Module Cabling Specifications
GBIC Transceiver Model and Product Number
|
Interface Connector
|
Nominal Wavelength
(nm)
|
Network Cable Type
|
Fiber Core Size(micron)
|
Modal Bandwidth
(MHz km)
|
Cable Distance2
|
1000BASE-T
(WS-G5483)
|
RJ-45
|
—
|
|
—
|
—
|
328 ft (100 m)
|
1000BASE-SX3
(WS-G5484)
|
SC duplex
|
850
|
MMF
|
62.5
62.5
50.0
50.0
|
160
200
400
500
|
722 ft (220 m)
902 ft (275 m)
1640 ft (500 m)
1804 ft (550 m)
|
1000BASE-LX/LH
(WS-G5486)
|
SC duplex
|
1310
|
MMF4
SMF
|
62.5
50.0
50.0
G.6525
|
500
400
500
—
|
1804 ft (550 m)
1804 ft (550 m)
1804 ft (550 m)
6.2 mi (10 km)
|
1000BASE-ZX
(WS-G5487)
|
SC duplex
|
1550
|
SMF
SMF7
|
G.6525
G.6525
|
—
—
|
43.5 mi (70 km)8
62.1 mi (100 km)
|
1The numbers given for multimode fiber-optic (MMF) cable refer to the core diameter.
2Cable distances are based on fiber loss. Additional factors, such as the number of splices and the optical quality of the fiber, can affect cabling distances.
3Use with MMF only.
5ITU-T G.652 SMF as specified by the IEEE 802.3z standard.
6Use with SMF only.
7Dispersion-shifted single-mode fiber-optic cable.
8The minimum link distance for ZX GBICs is 6.2 miles (10 km), when an 8-dB attenuator is installed at each end of the link. Without attenuators, the minimum link distance is 24.9 miles (40 km).
|
dwdm-gbic-42.94光模块
Table B-6 lists the fiber loss budgets for the GBIC transceivers.
Table B-6 Fiber Loss Budgets for the 1-GB GBIC Transceivers
1-GB GBIC Transceiver Product Number
|
Transmit (dBm)
|
Receive (dBm)
|
WS-G5484
(1000BASE-SX)
|
-3 (maximum)
-9.5 (minimum)
|
0 (maximum)
-17 (minimum)
|
WS-G5486
(1000BASE-LX/LH)
|
-3 (maximum)
-9.5 (minimum)
|
-3 (maximum)
-19 (minimum)
|
WS-G5487
(1000BASE-ZX)
|
5 (maximum)
0 (minimum)
|
-3 (maximum)
-23 (minimum)1
|
1The 1000BASE-ZX GBIC transceiver provides a minimum optical power budget of 23 dB. To determine the supported link distance, you need to measure your cable plant with an optical loss test set to verify that the optical loss of the cable plant (including connectors and splices) is less than or equal to this value. The optical measurement must be performed with a 1550 nanometer light source.
|
Table B-7 lists the physical and environmental specifications for the GBIC transceivers.
Table B-7 1-GB GBIC Transceiver Physical and Environmental Specifications
Item
|
Specification
|
Dimensions (H x W x D)
|
0.75 x 1.54 x 3.50 inches (19.0 x 39.1 x 88.9 mm)
|
Operating temperature
Storage temperature
|
32° to 122°F (0° to 50°C)
-40° to 185°F (-40° to 85°C)
|